LEMON Manuals: Even more car manuals for everyone

Front Lower Suspension Arm: Inspection

  1. INSPECT FRONT SUSPENSION LOWER ARM ASSEMBLY 
    1. As shown, flip the ball joint stud back and forth 5 times, before installing the nut.
    2. Using a torque wrench, turn the nut continuously one turn per 3 to 5 seconds and take the torque reading on the 5th turn.

      Torque: Standard turning torque 

      0.29 to 2.94 N*m (3 to 30 kgf*cm, 2.6 to 26 in.*lbf) 

      Fig 1: Measuring Turning Torque
      G04437578Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002