Rear Side Speaker: Removal
WARNING: This page is about a different car, the 2006 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.
- REMOVE REAR DOOR PULL HANDLE (See DISASSEMBLY )
- REMOVE REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (See DISASSEMBLY )
- REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH (See DISASSEMBLY )
- REMOVE REAR SPEAKER
- Disconnect the connector.
- Using a drill of less than diameter 4 mm (0.16 in.), drill out the 3 rivet heads and remove the rear speaker from the rear door panel.
- Gently and vertically put the drill to the rivet, and cut the rivet flanges.NOTE:
- Prizing the hole with a drill can lead to damage to the rivet hole or breaking the drill.
- Take cafe as the cut rivet is hot.
- Even if flange is taken off, continue drilling and push out remaining fragments with the drill.
- Using a vacuum cleaner, remove the drilled rivet and their dust from the inside of the rear door panel.