LEMON Manuals: Even more car manuals for everyone

ACCELERATOR PEDAL (for 2WD): Inspection

  1. INSPECT ACCELERATOR PEDAL ASSEMBLY 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Resistance 

        TESTER CONNECTION - SPECIFIED CONDITIONS

        Tester Connection Specified Condition
        3 (EP1) - 6 (VCP1) 1.5 to 6.0 k
        1 (EP2) - 4 (VCP2) 1.5 to 6.0 k

        If the result is not as specified, replace the accelerator pedal.

        Fig 1: Inspecting Accelerator Pedal Assembly
        G04460513Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002