LEMON Manuals: Even more car manuals for everyone

Crankshaft Position Sensor: Installation

  1. INSTALL CRANKSHAFT POSITION SENSOR 
    1. Apply a light coat of engine oil to the O-ring on the crankshaft position sensor.
    2. Install the crankshaft position sensor with the bolt.

      Torque: 8.0 N*m (80 kgf*cm, 71 in.*lbf) 

    3. Connect the crankshaft position sensor connector.
    Fig 1: Installing Crankshaft Position Sensor With Bolt
    G04441422Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT FENDER APRON SEAL RH 
    1. Install the front fender apron seal RH with the clip and 2 bolts.
    Fig 2: Installing Front Fender Apron Seal RH With Clip And Bolts
    G04441423Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH 
    1. Install the front fender splash shield sub-assembly RH with the screw and clip.
  4. INSTALL ENGINE UNDER COVER NO.1 (See step 111 in  INSTALLATION  ) 
    Fig 3: Installing Front Fender Splash Shield Sub-Assembly RH With Screw And Clip
    G04441424Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002