LEMON Manuals: Even more car manuals for everyone

Front Speed Sensor: Removal

  1. REMOVE FRONT WHEEL 
  2. REMOVE FRONT FENDER MUDGUARD SUB-ASSEMBLY 
    1. Remove the 3 screws, bolt and front fender mudguard sub-assembly.
  3. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY 
    1. Remove the bolts, screws, clips and front fender splash shield sub-assembly.
  4. REMOVE FRONT SPEED SENSOR 
    1. Disconnect the front speed sensor connector.
    2. Remove the 2 bolts from the body and the shock absorber assembly.
    3. Remove the clamp from the steering knuckle.
      Fig 1: Removing Clamp From Steering Knuckle
      G04443468Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the bolt and the front speed sensor.
    NOTE:
    • Prevent foreign matter from attaching to the sensor tip.
    • Clean the installation hole and the surface for the speed sensor every time the speed sensor is removed.
    Fig 2: Removing Bolt Of Front Speed Sensor
    G04443469Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002