LEMON Manuals: Even more car manuals for everyone

Front Speed Sensor: Inspection

  1. INSPECT FRONT SPEED SENSOR 
    1. Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
      • The surface of the front speed sensor is cracked, dented, or chipped off.
      • The connector is scratched, cracked, or damaged.
      • The front speed sensor has been dropped.
    2. Measure the resistance according to the value(s) in the table below.

      Resistance 

      LH 

      Fig 1: Inspecting Front Speed Sensor
      G04443470Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TESTER CONNECTION AND SPECIFIED CONDITION CHART

      Tester Connection Specified Condition
      2 (FL+) - 1 (FL-) 1.4 to 1.8 kΩ

      RH 

      TESTER CONNECTION AND SPECIFIED CONDITION CHART

      Tester Connection Specified Condition
      2 (FR+) - 1 (FR-) 1.4 to 1.8 kΩ
    3. Measure the resistance according to the value(s) in the table below.

      Resistance 

    LH 

    TESTER CONNECTION AND SPECIFIED CONDITION CHART

    Tester Connection Specified Condition
    1 (FL-) - Body ground 10 kΩ or higher
    2 (FL+) - Body ground 10 kΩ or higher

    RH 

    TESTER CONNECTION AND SPECIFIED CONDITION CHART

    Tester Connection Specified Condition
    1 (FR-) - Body ground 10 kΩ or higher
    2 (FR+) - Body ground 10 kΩ or higher