LEMON Manuals: Even more car manuals for everyone

On-Vehicle Inspection

  1. Remove the throttle body cover.
  2. Remove the intake air connector.
  3. Disconnect the oil control valve connector.
  4. Using an ohmmeter, measure the resistance between the terminals.
    Fig 1: Measuring Resistance Between Terminals
    G02650627Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Resistance: 6.9 to 7.9 Ω at 20° C (68° F) 

    If the resistance is not as specified, replace the valve.

  5. Reconnect the oil control valve connector.
  6. Reinstall the intake air connector.
  7. Reinstall the throttle body cover.