LEMON Manuals: Even more car manuals for everyone

Oil Pump: Reassembly

  1. INSTALL DRIVE AND DRIVEN ROTORS 
    1. Place the drive and driven rotors into pump body with the marks facing the pump body cover side.
      Fig 1: Placing Drive And Driven Rotors Into Pump Body
      G02650738Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Install the pump body cover with the 10 screws.

      Torque: 10 N.m (105 kgf.cm, 7 ft.lbf) 

    Fig 2: Installing Pump Body Cover
    G02650739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL RELIEF VALVE 
    1. Insert the relief valve and compression spring into the oil pump body hole.
    2. Install the plug.

      Torque: 49 N.m (500 kgf.cm, 36 ft.lbf) 

    Fig 3: Installing Plug
    G02650740Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002