LEMON Manuals: Even more car manuals for everyone

Positive Crankcase Ventilation (PCV) System: Inspection

  1. INSPECT PCV VALVE 
    1. Remove the PCV valve.
      1. Disconnect the PCV hose from the PCV valve.
      2. Remove the PCV valve.
    2. Install a clean hose to the PCV valve.
    3. Inspect the PCV valve operation.
      1. Blow air into the cylinder head cover side, and check that air passes through easily.
        CAUTION: Do not suck air through the valve. Petroleum substances inside the valve are harmful.
        Fig 1: Inspecting PCV Valve Operation
        G04271591Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Blow air into the air intake chamber side, and check that air passes through with difficulty.
        Fig 2: Checking Air Passes Through With Difficulty
        G04271592Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      3. Blow air into the air intake chamber side when lift up the inside valve, and check that there is a strong resistance to air flow.
      4. Fig 3: Blowing Air Into Air Intake Chamber Side
        G04271593Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If operation is not as specified, replace the PCV valve.

    4. Remove the clean hose from the PCV valve.
    5. Reinstall the PCV valve.
  2. INSPECT HOSES, CONNECTIONS AND GASKETS 

    Visually check for cracks, leaks or damage.

    Fig 4: Inspecting Hoses, Connections And Gaskets
    G04271594Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002