LEMON Manuals: Even more car manuals for everyone

Removal & Installation

WARNING: This page is about a different car, the 2003 Lexus ES 300 and 2002 Lexus ES 300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column cover. See REMOVAL & INSTALLATION of INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY under INSTRUMENT PANEL - ES 300 article in ACCESSORIES & EQUIPMENT.
  2. CAUTION: Pressing the claw hard breaks the claw.
    NOTE: Tape the screwdriver tip before use.
  3. Remove the windshield wiper switch assembly. Disconnect the connector. Using a screwdriver, release the claw and pull out the windshield wiper switch assembly. See Fig 1.
  4. For installation, reverse removal procedure.
Fig 1: Removing Wiper Switch Assembly
G00182447Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002