LEMON Manuals: Even more car manuals for everyone

Accelerator Pedal Rod Assembly (3MZ-FE): Replacement

  1. REMOVE ACCELERATOR PEDAL ROD ASSY 
    1. Disconnect the accelerator pedal position sensor connector.
    2. Remove the 2 bolts and pedal rod.
  2. INSTALL ACCELERATOR PEDAL ROD ASSY 
    1. Install the pedal rod with the 2 bolts.
      1. Torque: 4.9 N.m (50 kgf.cm, 43 in.lbf) 
    2. Connect the accelerator pedal position sensor connector.
    Fig 1: Disconnecting Accelerator Pedal Position Sensor Connector (3MZ-FE)
    G03032679Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002