LEMON Manuals: Even more car manuals for everyone

Rear Brake Speed Sensor: Removal

  1. REMOVE REAR WHEEL 
  2. DISCONNECT SPEED SENSOR CONNECTOR 
  3. REMOVE SPEED SENSOR WITH REAR AXLE HUB (See  REMOVAL  ) 
  4. REMOVE ABS SPEED SENSOR 
    1. Using a pin punch and hammer, drive out the 2 pins and remove the 2 attachments from SST.

      SST 09520-00031 (09520-00040, 09521-00020)

      Fig 1: Removing ABS Speed Sensor
      G02906569Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Mount the axle hub assembly in a soft jaw vise.
      NOTE: Replace the axle hub assembly if it is dropped or a strong shock is given to it. 
    3. Using SST and 2 bolts (Diameter: 12 mm, Pitch: 1.5 mm), remove the ABS speed sensor.

      SST 09520-00031 (09520-00040, 09521-00020), 09950-00020

      NOTE:
      • Do not allow any foreign matter sticking to the sensor rotor. 
      • Pull out the ABS speed sensor straightly not to damage the sensor rotor. 
      • If damage has occurred to the sensor rotor, replace the axle hub assembly. 
      • Do not scratch the contacting surface of the axle hub and speed sensor. 
        Fig 2: Removing ABS Speed Sensor Using SST
        G02906570Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002