LEMON Manuals: Even more car manuals for everyone

Power Steering Vane Pump: Removal

  1. REMOVE RH ENGINE UNDER COVER 
  2. REMOVE DRIVE BELT 

    Hook SST on the hexagonal portion of the drive belt tensioner bracket, compress the drive belt tension by turning the drive belt tensioner bracket clockwise, and remove the drive belt.

    Fig 1: Removing Drive Belt Using SST
    G02854735Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. SST 09249-63010
  3. DISCONNECT SUCTION HOSE 

    Loosen the clip and disconnect the suction hose.

    NOTE: Take care not to spill fluid on the drive belt.
  4. DISCONNECT PRESSURE FEED TUBE 

    Remove the union bolt and gasket, and disconnect the pressure feed tube.

    Fig 2: Identifying Pressure Feed Tube Union Bolt
    G02854736Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. DISCONNECT OIL PRESSURE SWITCH CONNECTOR 
  6. REMOVE PS VANE PUMP ASSEMBLY 
    1. Using SST, loosen the bolt A sufficiently so that pump assembly can be removed.
      Fig 3: Removing PS Vane Pump Assembly Using SST
      G02854737Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. SST 09249-63010
      NOTE: Bolt A cannot be removed.
    2. Remove the bolt B and PS vane pump assembly.