LEMON Manuals: Even more car manuals for everyone

Inspection Procedure

  1. Check Wire Harness 
    1. Disconnect the connectors of the power window regulator master switch assembly and power window regulator motor assembly LH.
      Fig 1: Reviewing Limit Switch & Pulse Sensor Information
      G01114132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check the continuity between the master switch assembly and motor assembly LH.

      Standard: 

      Fig 2: Identifying Power Window Regulator Master Switch Assembly
      G01114133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. OK: Replace Power Window Regulator Motor Assembly LH 
    2. NG: Repair Or Replace Harness And Connector