Test No. 42: Luggage Compartment Light Does Not Operate
- Check bulb in luggage compartment light. Luggage compartment light is located on inside of back (rear liftgate) door. See Figure. If bulb is okay, go to next step. If bulb is defective, replace bulb and recheck luggage compartment light operation.
- Check luggage compartment light. See LUGGAGE COMPARTMENT LIGHT under COMPONENT TESTS. If luggage compartment light is okay, go to next step. If luggage compartment light is defective, replace luggage compartment light and recheck luggage compartment light operation.
- Check wiring harness and electrical connectors between luggage compartment light and back door Electronic Control Unit (ECU). See SEQUOIA under WIRING DIAGRAMS in ILLUMINATION/INTERIOR LIGHTS article. Luggage compartment light may also be referred to as luggage room light. Back door ECU is located on the back (rear liftgate) door and contains 2 electrical connectors. See Figure. For back door ECU electrical connector terminal identification, see Figure. If wiring harness and electrical connectors are okay, go to next step. If wiring harness or electrical connector is defective, repair as necessary and recheck luggage compartment light operation.
- If Toyota hand-held tester is available, go to next step. If Toyota hand-held tester is not available, go to step 6.
- Connect hand-held tester to Data Link Connector (DLC) No. 3. See Figure. Using hand-held tester manufacturer's instructions, check operation of back door courtesy switch while using the DATA LIST. Back door courtesy switch is incorporated into lock assembly for back (rear liftgate) door. Back courtesy switch should be on when back (rear liftgate) door is opened and should be off when back (rear liftgate) door is closed. If back door courtesy switch does not operate properly, go to next step. If back door courtesy switch operates properly, go to step 8.
- Check back door courtesy switch. See BACK DOOR COURTESY SWITCH under COMPONENT TESTS. If back door courtesy switch is okay, go to next step. If back door courtesy switch is defective, replace back door courtesy switch with lock assembly and recheck luggage compartment light operation.
- Check wiring harness and electrical connectors between back door courtesy switch and back door Electronic Control Unit (ECU). See SEQUOIA under WIRING DIAGRAMS in ILLUMINATION/INTERIOR LIGHTS article. Back door ECU is located on the back (rear liftgate) door and contains 2 electrical connectors. See Figure. For back door ECU electrical connector terminal identification, see Figure. If wiring harness and electrical connectors are okay, go to next step. If wiring harness or electrical connector is defective, repair as necessary and recheck luggage compartment light operation.
- Check back door ECU for proper voltage and input signals. See BACK DOOR ELECTRONIC CONTROL UNIT under PIN VOLTAGE TESTS. If proper voltage and input signals exist, go to next step. If proper voltage and input signals do not exist, repair as necessary and recheck luggage compartment light operation.
- Replace back door ECU with a known-good back door ECU and recheck luggage compartment light operation. If luggage compartment light operates properly, original back door ECU was defective. If luggage compartment light still does not operate properly, check wiring harness and electrical connectors for back door ECU and luggage compartment light for an intermittent problem. See SEQUOIA under WIRING DIAGRAMS in ILLUMINATION/INTERIOR LIGHTS article. Repair wiring harness or electrical connector as necessary.