LEMON Manuals: Even more car manuals for everyone

Land Cruiser

  1. Locate and remove starter relay. Starter relay is marked "ST". See STARTER RELAY LOCATION  table. Using ohmmeter, verify continuity exists between relay terminals No. 3 and 4. See STEP 1. See Figure. Continuity should not exist between terminals No. 1 and 2. If continuity is not as specified, replace relay.
  2. Check relay operation by applying battery voltage to terminals No. 3 and 4. See STEP 2. See Figure. Continuity should now exist between terminals No. 1 and 2. If relay does not test as indicated, replace relay.