DTC 11 & 12: Throttle Control Relay Circuit Open Or Short
- Remove TRAC fuse from relay block No. 2. Check fuse. If fuse is okay, reinstall fuse and go to next step. If fuse is faulty, repair short in wiring or components and replace fuse.
- Remove throttle control relay from relay block No. 5. Check voltage at relay cavity terminal No. 1. If 10-14 volts exists, go to next step. If 10-14 volts does not exist, repair wiring as necessary. See appropriate wiring diagrams under WIRING DIAGRAMS.
- Check throttle control relay. See THROTTLE CONTROL RELAY under COMPONENT TESTS . Replace relay if faulty. If relay is okay, go to next step.
- Check for open or short in wiring between throttle control relay and throttle control ECU. Repair wiring if necessary. If no problems are found, check throttle control ECU. See THROTTLE CONTROL ECU PIN VOLTAGE TESTS under PIN VOLTAGE . Replace ECU if necessary.