Abs Circuit Inspection
- Remove ABS ECU, leaving harness connectors connected. Using DVOM, connect negative test lead to chassis ground. Backprobe ABS ECU harness connector with positive test lead at circuit being tested. See Fig 1. Ensure circuit values are within specification under condition specified. See Fig 2. Repair as necessary.
- Ensure ignition is off. Disconnect ABS ECU harness connectors. Using DVOM, backprobe specified circuits at ABS ECU harness connectors. See Fig 1 and Fig 3. Ensure circuit values are within specification. Repair as necessary.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002