LEMON Manuals: Even more car manuals for everyone

Ignition Coil: Installation

  1. To install, reverse removal procedure. Tighten bolt to specification. See TORQUE SPECIFICATIONS .
  2. When installing spark plug wire on ignition coil, ensure spline on ignition coil aligns with spline on holder and install spark plug wire. Ensure holder is properly positioned on grommet and ignition coil. See Fig 2. Lightly pull upward on holder to ensure lock claw is locked in place.
Fig 1: Releasing Typical Lock Claw On Spark Plug Wire
G96A10710Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Identifying Typical Holder, Grommet & Checking Holder, & Grommet Installation
G96B10711Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002