LEMON Manuals: Even more car manuals for everyone

Throttle Body: Installation

  1. To install, reverse removal procedure using NEW gaskets. Ensure gasket for throttle body is installed on throttle body with protrusion facing upward. See Fig 1.
    CAUTION: Cooling system must be properly bleed when refilling cooling system. See COOLING SYSTEM BLEEDING .
  2. Ensure the shorter bolts are installed at the top of the throttle body and longer bolts are installed at bottom of throttle body. Tighten bolts/nuts to specification. See TORQUE SPECIFICATIONS . Fill and bleed cooling system. See COOLING SYSTEM BLEEDING .
Fig 1: Installing Gasket For Throttle Body
G97C08016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002