Indicator Light
Remove combination meter (instrument cluster). Locate 13-pin "B" connector in middle of combination meter. Connect three 1.5 volt dry cell batteries in series. Connect dry cell positive lead to terminal B5 (Yellow wire) and negative lead to terminal B6 (Brown wire). If indicator light does not come on, replace light. If indicator light comes on, inspect wire harness and connectors between indicator light and ATS ECU. See SYSTEM TESTS. Repair harness or connectors as necessary. If harness and connectors are okay, replace ATS ECU.
NOTE:
For other anti-theft or door lock components, see appropriate DOOR LOCKS - POWER article.