LEMON Manuals: Even more car manuals for everyone

Door Lock Control Relay

  1. Disconnect the connector from the relay. Inspect the connector on the wire harness side, between terminals as shown. See Fig 1-Fig 3 .
  2. If circuit is as specified, inspect the door lock signal.
Fig 1: Identifying Door Lock Control Relay Connector Terminals
G00114459Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Testing Door Lock Control Relay Operation (1 Of 2 )
G00114472Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 3: Testing Door Lock Control Relay Operation (2 Of 2)
G00114461Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002