LEMON Manuals: Even more car manuals for everyone

Removal & Installation: Removal

  1. Loosen pinch bolt (Fig 1  ) attaching coupling yoke to worm shaft. Index mark coupling yoke and worm shaft. Loosen steering wheel nut and using a puller, remove steering wheel. For additional information  , See Steering Wheel and Column Switches in STEERING Section. 
  2. Disconnect wiring harness for ignition switch, turn signal, horn, and headlight dimmer switch at plug-in connector under instrument panel. Remove turn signal switch. Unscrew column floor cover bolts. Detach lower instrument panel protective cover (plastic), if necessary. Remove bolts mounting breakaway bracket. Withdraw column assembly toward inside of passenger compartment.
    Fig 1: Pinch Bolt Separation Point And Index Marking
    G09356383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002