LEMON Manuals
: Even more car manuals for everyone
Home
›
Suzuki
›
2007
›
Aerio Base, FWD, Automatic
›
Repair and Diagnosis
›
Transmission
›
Automatic Trans
›
Automatic Transmission
›
Repair Instructions
›
Input Shaft Speed Sensor Removal and Installation
›
Removal
Input Shaft Speed Sensor Removal and Installation: Removal
Disconnect negative cable at battery.
Disconnect input shaft speed sensor connector (2).
Remove input shaft speed sensor (1) by removing its bolt.
Fig 1: Removing Input Shaft Speed Sensor
Courtesy of SUZUKI OF AMERICA CORP.