LEMON Manuals: Even more car manuals for everyone

Rear Door Glass: Installation

  1. Install the glass assembly - rear door.
    CAUTION: Avoid impact and damage to the glass assembly - rear door.
  2. Install the glass - rear door partition and the sash COMPL - rear partition.

    Tightening Torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  3. Install the running channel - rear door.
    CAUTION: Check that the running channel - rear door is securely fixed to the panel assembly - rear door and to the sash COMPL - rear partition.
  4. Install the sealing cover - rear door. Ref. to EXTERIOR BODY PANELS>Rear Sealing Cover>INSTALLATION
  5. Install the trim panel - rear door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>INSTALLATION
  6. Connect the battery ground terminal. Ref. to NOTE>BATTERY