LEMON Manuals: Even more car manuals for everyone

Front Door Glass: Removal

  1. Disconnect the ground cable from battery and wait for at least 60 seconds before starting work. Ref. to NOTE>BATTERY
    NOTE: For model with battery sensor, disconnect the ground terminal from battery sensor.
  2. Remove the trim panel - front door. Ref. to EXTERIOR/INTERIOR TRIM>Door Trim>REMOVAL>FRONT DOOR
  3. Remove the sealing cover - front door. Ref. to EXTERIOR BODY PANELS>Front Sealing Cover>REMOVAL
  4. Remove the front door inner pad (a).
    CAUTION: If the clip is damaged, replace it with a new part because the panel assembly - front door may be deformed.
    G10270848
  5. Connect the battery ground terminal. Ref. to NOTE>BATTERY
  6. Remove the glass assembly - front door.
    1. Connect the switch - power window and then turn the ignition switch to ON.
    2. Operate the switch - power window to move the glass assembly - front door to the position where the mounting bolts can be seen.
    3. Remove the mounting bolts from the glass assembly - front door.
      G10270849
    4. While tilting the glass, remove the glass assembly - front door.
      CAUTION: Avoid impact and damage to the glass assembly - front door.
      G10270850
  7. Remove the glass - front door partition.
    1. Remove the bolts and screws, and then remove the running channel - front door and the sash COMPL - partition.
      G10270851
    2. Remove the glass - front door partition.
      G10270852