LEMON Manuals: Even more car manuals for everyone

Front Hood: Assembly

  1. Install the hinge COMPL - front hood.

    Tightening Torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  2. Install the stay assembly - front hood.

    Tightening Torque: 

    20 N.m (2 kgf-m, 14.8 ft-lb)

  3. Install the seal - front duct.
  4. Install the duct - outer front hood.

    Tightening Torque: 

    4.5 N.m (0.5 kgf-m, 3.3 ft-lb)

  5. Install the duct - inner front hood.
    NOTE: Securely insert the claws of the front hood duct.
    G10271284
  6. Install the insulator - front hood.
  7. Align the alignment marks (A), and install the striker - front hood to the hood COMPL - front.
    CAUTION: When installing the striker - front hood, make sure that the front and rear sides are positioned in a correct direction.
    NOTE: It is not necessary to adjust the striker - front hood because there is no span of adjustable range.

    Tightening Torque: 

    33 N.m (3.4 kgf-m, 24.3 ft-lb)

    G10271285