LEMON Manuals: Even more car manuals for everyone

Front Exhaust Pipe: Installation

  1. Set the front exhaust pip and center exhaust pipe to the vehicle, and temporally tighten the nuts which secure the front exhaust pipe to cylinder head.
    NOTE: Use a new gasket.
    Fig 1: Locating Front Exhaust Pipe And Center Exhaust Pipe Nuts
    G08315697Courtesy of SUBARU OF AMERICA, INC.
  2. Install the bolts, springs, and nuts which secure the rear exhaust pipe to the center exhaust pipe.
    NOTE: Use a new gasket.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb) 

    Fig 2: Locating Rear Exhaust Pipe Bolts And Nuts
    G08317713Courtesy of SUBARU OF AMERICA, INC.
  3. Tighten the bolts which secure the center exhaust pipe to the hanger bracket.

    Tightening torque: 

    35 N.m (3.6 kgf-m, 25.8 ft-lb) 

    Fig 3: Locating Center Exhaust Pipe Bolt
    G07664995Courtesy of SUBARU OF AMERICA, INC.
  4. Tighten the nuts which hold front exhaust pipe to cylinder heads.

    Tightening torque: 

    30 N.m (3.1 kgf-m, 22.1 ft-lb) 

    Fig 4: Locating Front Exhaust Pipe And Center Exhaust Pipe Nuts
    G08315697Courtesy of SUBARU OF AMERICA, INC.
  5. Connect the front oxygen (A/F) sensor connector (A) and rear oxygen sensor connector (B), and fasten the harness with the clip (C).
    Fig 5: Front Oxygen (A/F) Sensor Connector, Rear Oxygen Sensor Connector And Clip
    G09486632Courtesy of SUBARU OF AMERICA, INC.
  6. Install the under cover. Ref. to INSTALLATION , Front Under Cover.
  7. Lower the vehicle.
  8. Connect the battery ground terminal. Ref. to BATTERY .