LEMON Manuals: Even more car manuals for everyone

Rear Regulator and Motor Assembly: Removal

  1. Disconnect the ground cable from battery. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, disconnect the ground terminal from battery sensor.
  2. Remove the trim panel - rear door. <Ref. to REAR DOOR , REMOVAL, Door Trim.>
  3. Remove the sealing cover - rear door.
  4. Remove the glass assembly - rear door. <Ref. to REMOVAL , Rear Door Glass.>
  5. Remove the rear regulator and motor assembly.
    1. Disconnect the connector of the motor - rear.
      Fig 1: Disconnecting Motor - Rear Connector
      G08315168Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the bolts, and then remove the regulator and motor assembly - rear.
      Fig 2: Locating Regulator And Motor Assembly Bolts
      G10270870Courtesy of SUBARU OF AMERICA, INC.