LEMON Manuals: Even more car manuals for everyone

Rear Door Glass: Installation

  1. Install the glass assembly - rear door.
    CAUTION: Avoid impact and damage to the glass assembly - rear door.
  2. Install the glass - rear door partition and the sash COMPL - rear partition.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb) 

  3. Install the running channel - rear door.
    CAUTION: Check that the running channel - rear door is securely fixed to the panel assembly - rear door and to the sash COMPL - rear partition.
  4. Install the sealing cover - rear door. <Ref. to INSTALLATION , Rear Sealing Cover.>
  5. Install the trim panel - rear door. <Ref. to INSTALLATION , Door Trim.>
  6. Connect the battery ground terminal. <Ref. to BATTERY , NOTE, Note.>
    NOTE: For models other than STI model, connect the ground terminal to battery sensor.