EGR Valve Control
CAUTION:
After executing the system operation check mode, execute the Clear Memory Mode. < Ref. to
OPERATION , Clear Memory Mode. >
- On << System Operation Check Mode >> display, select {EGR Valve Control}.
- On << Start the Engine >> display, start the engine and click the [OK] button.
- In the << EGR Valve Control >> display, click the [↑] button or the [↓] button to change the setting values, then click the [OK] button.
Setting is possible in increments of 1 STEP. However, the STEP number that can actually be controlled will vary depending on the vehicle.
- Click the [Cancel] button to stop the EGR valve control.
- Click the [F12 Exit] button to end the EGR valve control. The screen will return to the << System Operation Check Mode >> screen.NOTE: For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".