LEMON Manuals: Even more car manuals for everyone

Camshaft Position Sensor (Method With Oscilloscope)

  1. Prepare an oscilloscope.
  2. Remove the lower inner trim of passenger's side. < Ref. to REMOVAL , Lower Inner Trim. >
  3. Turn over the floor mat of passenger's seat.
  4. Remove the protect cover.
    Fig 1: Locating Protect Cover Bolts
    G07662755Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the nuts and bolts which hold the ECM to the bracket.
    Fig 2: Locating Nuts And Bolts Which Hold ECM To Bracket
    G07662756Courtesy of SUBARU OF AMERICA, INC.
  6. Connect the probe to ECM connector.
    Fig 3: Connecting Probe To ECM Connector
    G07662757Courtesy of SUBARU OF AMERICA, INC.
    PROBE CONNECTING TO ECM CONNECTOR TERMINALS REFERENCE CHART

    Terminal No. Probe
    24 +
    30 -
  7. Start the engine and let it idle.
  8. Check the pattern is the same as the waveform and voltage shown below.
    Fig 4: Waveform And Voltage Graph
    G07662758Courtesy of SUBARU OF AMERICA, INC.