Horn System: Horn: Removal
- Disconnect the ground cable from battery.
- Remove the bumper face assembly.
- Remove the clips, turn over the front mud guard, and disconnect the fog light connector. (Model with fog light)
- Remove the clips at the upper side of the bumper.
- Remove the clips from the fender.
- Remove the clips at the lower side of bumper.
- Detach the flange section on the bumper face side from the bracket side front UPR.CAUTION: Do not pull forcibly. Doing so may damage the flange sections on the bumper face side.NOTE: While pushing upward with the underside (a) of the fog light, remove (b) to (e) in order. Detach the opposite side in the same manner.
- Remove the clips and remove the air intake duct.
- Remove the clips and remove the grille bracket.
- Remove the Lo pitch side horn.
- Disconnect the connector.
- Remove the horn bracket mounting bolt and remove the Lo pitch side horn.
- Remove the Hi pitch side horn.
- Disconnect the connector.
- Remove the horn bracket mounting bolt and remove the Hi pitch side horn.