LEMON Manuals: Even more car manuals for everyone

Sedan Model

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the rear quarter trim. <Ref. to SEDAN MODEL , REMOVAL, Rear Quarter Trim .>
  3. Remove the curtain airbag module. <Ref. to REMOVAL .>
  4. Disconnect harness connector from the noise suppressor.
  5. Remove the harness clip.
  6. Remove the screws and detach the noise suppressor.
    Fig 1: Locating Noise Suppressor Screws (Sedan Model)
    G05022574Courtesy of SUBARU OF AMERICA, INC.