LEMON Manuals: Even more car manuals for everyone

5MT Model

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from vehicle body.

    < Ref. to REMOVAL - 5MT , Manual Transmission Assembly . >

  2. Remove the two clips from the release lever and remove the release bearing. (Non-turbo model)
    CAUTION: Be careful not to deform the clips.
  3. Remove the release bearing from the clutch release lever. (Turbo model)
  4. Remove the dust cover.
    Fig 1: Identifying Release Lever And Dust Cover
    G05669720Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the lever spring from the pivot with a screwdriver by accessing it through the clutch housing release lever hole. Then remove the release lever.
    Fig 2: Removing Lever Spring From Pivot With Screwdriver
    G05669721Courtesy of SUBARU OF AMERICA, INC.