LEMON Manuals: Even more car manuals for everyone

Clutch Pedal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Remove the steering column. < Ref. to REMOVAL . >
  3. Disconnect the connectors of the stop light switch and clutch switch.
  4. Remove the snap pins from clevis pins which secure the lever to the push rod and operating rod.
  5. Pull out the clevis pins which secures the lever to the push rod and operating rod.
    Fig 1: Identifying Snap Pin, Clevis Pin, Push Rod And Operating Rod
    G05669764Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the nut which secures the clutch master cylinder.
    Fig 2: Identifying Clutch Master Cylinder Nut
    G05003694Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the bolt which secures the brake pedal and clutch pedal, and remove the pedal assembly.