Reduction Driven Gear: Removal
- Remove the transmission assembly from vehicle body. < Refer to REMOVAL , AUTOMATIC TRANSMISSION ASSEMBLY. >
- Remove the rear wheel speed sensor, and separate the extension case from transmission case. < Refer to REMOVAL , EXTENSION CASE. >
- Remove the center differential carrier. < Refer to REMOVAL , CENTER DIFFERENTIAL CARRIER. >
- Set the range select lever to the "P" range.
- Using ST1, ST2 and ST3, pull out the reduction driven gear.
ST1 499737100 PULLER SET
ST2 18680AA010 GEAR HOLDER
ST3 18766AA000 SUPPORT PULLER