LEMON Manuals: Even more car manuals for everyone

Planetary Gear Bushing

Measure the outer diameter (A) of pin which is press-fitted into shaft.

Then, measure the inner diameter (B) of planetary gear bushing, and calculate the clearance.

If it exceeds the service limit, replace the planetary gear or shaft.

Clearance: 

Standard 

0.035 - 0.065 mm (0.001 - 0.0025 in) 

Service limit 

0.1 mm (0.003 in) 

Fig 1: Measuring Outer Diameter Of Pin Which Is Press-Fitted Into Shaft
G03828351Courtesy of SUBARU OF AMERICA, INC.