LEMON Manuals: Even more car manuals for everyone

Check Door Lock Actuator And Circuit

CHECKING STEPS REFERENCE

Step Check Yes No
1 CHECK OUTPUT SIGNAL. 
Measure the voltage between the harness connector terminal of integrated module and chassis ground when moving the door lock switch to LOCK.
Connector & terminal 
  1. (B281) No. 6 (+) - Chassis ground (-): 
Is the measured value more than 10 V? Go to step 2. Replace the integrated module.
2 CHECK OUTPUT SIGNAL. 
Measure the voltage between the harness connector terminal of integrated module and chassis ground when moving the door lock switch to UNLOCK.
Connector & terminal 
  1. (B281) No. 7, 8 (+) -- Chassis ground (-) 
Is the measured value more than 10 V? Go to step 3. Replace the integrated module.
3 CHECK DOOR LOCK ACTUATOR. 
Check the door lock actuator.
Front door lock actuator: < Ref. to FRONT DOOR LOCK ACTUATOR . >
Rear door lock actuator: < Ref. to REAR DOOR LOCK ACTUATOR . >
Rear gate latch lock actuator: < Ref. to REAR GATE LATCH LOCK ACTUATOR . >
Is the door lock actuator OK? Check the harness for open circuits or shorts between the integrated module and the door lock actuator. Replace the door lock actuator.