LEMON Manuals: Even more car manuals for everyone

Shift Solenoids, Duty Solenoids and ATF Temperature Sensor: Installation: Notes

  1. Install solenoids and ATF temperature sensor.

    Tightening torque: 

    1. T:  8 N.m (0.8 kgf-m, 5.8 ft-lb)
    Fig 1: Installing Solenoids And ATF Temperature Sensor
    G02862530Courtesy of SUBARU OF AMERICA, INC.
  2. Connect harness connectors.

    Connect connectors of same color, and secure connectors to valve body using clips.

    Fig 2: Securing Connectors To Valve Body Using Clips
    G02862531Courtesy of SUBARU OF AMERICA, INC.
  3. Apply proper amount of liquid gasket to the entire oil pan mating surface.

    Fluid packing: 

    Three Bond 1217B 

    Fig 3: Applying Liquid Gasket To Oil Pan Mating Surface
    G02862532Courtesy of SUBARU OF AMERICA, INC.
  4. Install oil pan.

    Tightening torque:  4.9 N.m (0.50 kgf-m, 3.6 ft-lb)

    Fig 4: Installing Oil Pan
    G02862533Courtesy of SUBARU OF AMERICA, INC.
  5. Fill ATF up to the middle of the "COLD" side on level gauge by using the gauge hole. Refer to AUTOMATIC TRANSMISSION FLUID  .
  6. Check the ATF level. Refer to AUTOMATIC TRANSMISSION FLUID  .