LEMON Manuals: Even more car manuals for everyone

2.5 L Model

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the oil cooler outlet and inlet pipes.
    CAUTION: Be sure to use a new aluminum washer.

    Tightening torque: 

    1. T1:  44 N.m (4.5 kgf-m, 32.5 ft-lb)
    2. T2:  25 N.m (2.5 kgf-m, 18.1 ft-lb)
      Fig 1: Installing Oil Cooler Outlet & Inlet Pipes
      G02037090
  2. Install ATF cooler pipe to frame.
    Fig 2: Installing ATF Cooler Pipe To Frame
    G02037091
  3. Connect ATF cooler hose to pipe transmission side.
    NOTE:
    • Install so that the hose is not folded over, excessively bent, or twisted.
    • Be careful to insert the hose to the specified position.
    Fig 3: Connecting ATF Cooler Hose To Pipe Transmission Side
    G02037092
  4. Connect ATF cooler hose to pipe of radiator side.
    NOTE:
    • Install so that the hose is not folded over, excessively bent, or twisted.
    • Be careful to insert the hose to the specified position.
    Fig 4: Connecting ATF Cooler Hose To Pipe Of Radiator Side
    G02037093
  5. Install the under cover.
  6. Install battery and washer tank.
  7. Fill ATF. See Automatic Transmission Fluid .
NOTE: Make sure there are no ATF leaks in joints between the transmission, radiator, pipes, and hoses.