Sensitivity Of Rain Sensor (LI82.30-P-050058)
Reference number: LI82.30-P-050058
SENSITIVITY OF RAIN SENSOR
TECHNICAL SERVICE BULLETIN
| SMART: | 451.### with SA code V54 |
| DESIGN GROUP: | 82.30 Windshield wipers |
| REASON FOR CHANGE: |
COMPLAINT
The customer complains that the windshield wiper is not actuated early enough by the rain sensor in light rain.
CAUSE
Wiper lever in position 1 (intermittent) activates the rain sensor. The wipe frequency is set automatically according to the amount of precipitation on the surface of the sensor.
The customer may perceive that the rain sensor is actuating the windshield wiper too late.
REMEDY
The sensitivity of the rain sensor is preset to level 3 at the factory. In the event of complaints, the sensitivity of the sensor can be increased to level 4 using DAS.
DAS > Systems > SAM > Control unit adaptations > Parameterization > Rain sensor sensitivity > Coding
The light sensor has a fixed parameterization that cannot be changed. The setting of the rain sensor therefore has no effect on the light sensor.
Replacing the control unit, rain sensor or windshield will not remedy the above complaint!
SYMPTOMS
| Overall vehicle/Cleaning system/Windscreen wiper/Wipes too many time |
| Overall vehicle/Cleaning system/Windscreen wiper/Does not wipe enough |
WORK UNITS
| Op. no. | Operation text | Time | Damage code | Note |
|---|---|---|---|---|
| 82128 81 |