LEMON Manuals: Even more car manuals for everyone

Installation [06/2015 - ]: Procedure

  1. INSTALL VACUUM SENSOR (MANIFOLD ABSOLUTE PRESSURE SENSOR) 
    1. Align the protrusion of the vacuum sensor bracket with the hole of vacuum sensor (manifold absolute pressure sensor).
      GTY454455Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protrusion
      *b Hole
    2. Install the vacuum sensor (manifold absolute pressure sensor) with the bolt.

      Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf) 

    3. Connect the vacuum hose and vacuum sensor (manifold absolute pressure sensor) connector to the vacuum sensor (manifold absolute pressure sensor).
  2. INSTALL NO. 2 CYLINDER HEAD COVER 

    Refer to PROCEDURE - Step 82