LEMON Manuals: Even more car manuals for everyone

Monitor Description

Automatic Transaxle: 

The ECM assumes that the vehicle is being driven when the indicated engine speed is 2210 rpm or more and 30 seconds have elapsed since the park/neutral position switch was turned OFF (typical example values). If there is no speed signal from the combination meter, despite these conditions being met, the ECM interprets this as a malfunction in the speed signal circuit. The ECM then illuminates the MIL and stores the DTC.

Manual Transaxle: 

The ECM assumes that the vehicle is being driven when fuel cut with the accelerator pedal released continues for 4.26 seconds or more. If there is no speed signal from the combination meter, despite this condition being met, the ECM interprets this as a malfunction in the speed signal circuit. The ECM then illuminates the MIL and stores the DTC.