LEMON Manuals: Even more car manuals for everyone

DTC P0630: VIN not Programmed or Mismatch - ECM / PCM: Procedure

  1. READ CURRENT DTC 
    1. Connect the Techstream to the DLC3.
    2. Turn the ignition switch to ON.
    3. Turn the Techstream on.
    4. Enter the following menus: Powertrain / Engine / Trouble Codes.
    5. Read the DTCs.
      RESULT

      Result Proceed to
      P0630 is output A
      P0630 and other DTCs are output B

      HINT: 

      If any DTCs other than P0630 are output, troubleshoot those DTCs first.

      NOTE:

      If P0630 is stored, the VIN must be input to the ECM using the Techstream. However, all DTCs are cleared automatically by the Techstream when the VIN is input. If DTCs other than P0630 are output, troubleshoot them first.

    B → See step   3 

    A: Go to next step 

  2. INPUT VIN WITH TECHSTREAM 
    1. Refer to Registration. Refer to REGISTRATION .

    NEXT → END 

  3. GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART