Removal Procedure
Courtesy of GENERAL MOTORS CORP.
- Remove the trim covers from the upper seat base.
Courtesy of GENERAL MOTORS CORP.
- Remove the trim cover from the front lower base.
Courtesy of GENERAL MOTORS CORP.
- Remove the lock bolts that secure the seat base rear hooks to the floor.
Courtesy of GENERAL MOTORS CORP.
- Remove the lower anchor bolt from the seat belt.
Courtesy of GENERAL MOTORS CORP.
- Pull back on the quarter trim panel to access the electrical connection for the power seat.
- Disconnect the electrical connector.
Courtesy of GENERAL MOTORS CORP.
- Use a flat-bladed tool to disengage the locking hooks from the floor anchor.
- Tilt the seat base forward about 45 degrees to disengage the front hooks.
- Remove the seat from the vehicle.