LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Remove the outer door panel. Refer to Outer Door Panel Replacement Front - Bolt On .
  2. Partially remove the door insulator at the rear of the door.
  3. Remove the lock cylinder retainer.
  4. Fig 1: View Of Door Lock Cylinder Retainer
    GM867579Courtesy of GENERAL MOTORS CORP.
  5. Rotate the lock cylinder forward, with the lock rod attached, into the door access hole.
  6. Fig 2: Rotating Door Lock Cylinder
    GM864000Courtesy of GENERAL MOTORS CORP.
  7. Remove the lock cylinder with the V-clip by rotating the lock cylinder off of the lock rod.
  8. Fig 3: Identifying Door Lock Cylinder
    GM864001Courtesy of GENERAL MOTORS CORP.