LEMON Manuals: Even more car manuals for everyone

Removal Procedure

  1. Using a small flat-bladed tool, remove the rear door wiring harness electrical conduit from the rear door pillar.
  2. Disconnect the rear door wiring harness electrical connector.
  3. Remove the rear door check link bolt.
  4. Fig 1: View Of Rear Door Check Link Bolt
    GM874887Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear door hinge bolts.
  6. With an assistant, remove the rear door.
  7. Fig 2: View Of Rear Door Hinge Bolts
    GM878831Courtesy of GENERAL MOTORS CORP.