LEMON Manuals
: Even more car manuals for everyone
Home
›
Saturn
›
2000
›
LS2 V6-3.0L VIN R
›
Repair and Diagnosis
›
Powertrain Management
›
Computers and Control Systems
›
Camshaft Position Sensor
›
Diagrams
›
Diagnostic Aids
›
Digital Multimeter Usage
›
Continuity/Resistance/Diode
›
Continuity
Continuity
To check for continuity in a circuit use the lowest ohm scale available. Place the leads of the multimeter on each end of the circuit or component being tested. A reading of less than one ohm indicates acceptable continuity.