LEMON Manuals: Even more car manuals for everyone

Code 36 - Noise On Turbine Speed Input: Description

PCM detects turbine speed by counting pulses from turbine speed sensor. PCM can detect incorrect input signals (noise) by comparing input value to normal data in memory.

PCM sets code 36 if TSS input is incorrect or if TSS indicates turbine speed is greater than 1400 RPM.

NOTE: Test numbers refer to numbers on diagnostic chart.
  1. This step checks for connector problems at PCM.
  2. This step checks for connector problems at TSS.
  3. This step checks PCM for internal problems.
  4. This step checks each circuit for any visual problems.
  5. This step lists other possible causes of code 36.